The Uspace range of Server Cabinets/Racks are designed to house Servers, KVMs, Switches and Networking products from the current major brands such as IBM, Dell and Hp. They have been load tested to 1000KGs evenly distributed and achieve an 80% airflow (with vented steel doors). Manufactured in the UK in accordance with IEC 297 3 and EIA STD 310 for panels and racks for housing electronic equipment.
Standard Build Specification
- Open Frame
- Lockable Side Panels
- Single Steel Vented Lockable Rear Door
- Single Steel Vented Lockable Front Door
- Vented Top with Cable Entry Section
- Front and Rear 19inch Mounts
- 6-8 Jumper Rings
- Transport Castors
Load rating: Load Bearing Castors = 400KGs or on Plinth Kit = 1000KGs
Height: 1983mm + 60mm For Transport Castors or 100mm For Load Bearing Castors / Plinth
Depth: 1060mm including Doors
Weight: 115KGs Nominal (with Steel Doors Fitted)
Colour: Anthracite Grey Ral 7016
Gap Between 19" Mounts: Min:500mm (Can be reduced by fitting depth support rails)
Max: 720mm (Can be increased by fitting extended 19" mounts)
A 2 day delivery charge of £50 applies within mainland UK apart from to the following postcodes AB, IV, PA20+, PH4+, TR, please call for pricing to these areas or delivery outside mainland UK.
The specialist Courier used will if access allows bring the cabinet into the Goods In or a Ground floor reception from where it is the customers responsibility. Please ensure that there will be someone on site to accept delivery and that access is sufficient for the size of cabinet ordered as additional charges will apply for any failed deliveries.
For an additional charge the siting of the cabinet into your preferred location can be arranged as
long as access allows and that it is possible to do so with out breaking it down. If you believe the cabinet needs to be broken down and then reassembled on site this needs to be arranged prior
If you require any special arrangements such as out of hours delivery please contact us.